What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
12.06.2025 11:08

Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
Edit 2024–10.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
Do older women know what they want?
A circuit breaker is similar, but is resettable.
The bolt then partially travels down the line to your home.
What does a fuse do?
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
Barnstars:
An AC voltage/ current source, and an ac inductive load.
MongoDB (NASDAQ:MDB) Reports Strong Q1, Stock Jumps 14.3% - Yahoo Finance
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
[old diagram got deleted by accident]
There are three different concepts here that are getting confused.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
(Dc diagram shown, AC is similar).
These devices are installed between the “hot” and “neutral” and protective ground.
Satellite measures river flow waves for the first time - The Washington Post
Because the load is inductive, the current lags the voltage.(by a bit).
so, what happens?
It also is a device that limits the change in current flow.
Alabama reports its first 2025 case of this dangerous virus - AL.com
A fuse is a non-resetable over current circuit protector.
He then describes Rainy Season and Lightning.
2024–10–16 [ OO OLAOYE OYEBODE ]
'Just one mutation away', COVID-19-like virus in China could spark outbreak: Study - WION
a photo is worth a thousand words.
eight
But it can get overloaded, and no longer works.
What Makes the Florida Panthers Special? Gaudreau Tribute a Fine Example - Florida Hockey Now
This is the picture of an electronic coil of wire wound around a core of magnetic material.
What is lightning?
It seems Mohan does not understand the difference between a comment and an Answer.
RKF Jr. May Have Just Ruined Our Best Weapon Against Bird Flu - The Bulwark
Here is a simplified AC power diagram.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
The other is “what does a “fuse” do?”
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
I post the exact comment here.
The USB-C dream is dead and it’s too late to revive it - Android Authority
The MOV will conduct when the voltage exceeds 50% of line voltage.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
but this device (an Inductor) … impedes the rapid changes in the current.
the problem then depends on "how fast does the fuse operate?".
[image of Common-mode choke]
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
This is 'the assistant's answer'
Can the fuse protect the electronic devices from lightning instead of a surge protector.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
This is where the MOV conducts again, and dissipated the energy.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
In schematic diagrams this is the symbol for a fuse:
First Sentence:
what exactly is a ‘surge’ protector?
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
But… the neutral is now “floating” because of the 1 ohm resistance.
The third is lightning and “how it gets conducted into a home.”
For this case there are devices called Metal oxide varistors (MOV).
Upvotes:
At one ohm, the resistor has a maximum of 1 watt power.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
He then describes the function of a fuse.
nine
This one hit behind the barn.
but I think this circuit , shows a few more pieces.
At least they know the answer if they wanted it.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
One is “what exactly is in a ‘surge protector’ ? ”
Now when you have a certain ac resistance, then a current flows in a loop.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
One
This is where this question deviates from being a 'generic' question, and becomes more specific.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
There are two important concepts here.
This device then solves the entire problem.
These are simplified answers to the original question, and does not change anything I wrote above.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
2024–10–10[John johnson John Johnson ]
2024–10–14 [Omar Gharbi Omar Gharbi ]
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
He then asserts :
So, the voltage could go up to 500 volts, and the fuse will not open up.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.